The Metrix SA6200 is a replacement for the old Hardy DI-113 contact our office for a quote. 

The SA6200 Accelerometer datasheet provides detailed technical specifications and ordering information for this vibration sensor. Here's a summary of the key points:

Overview

• Type: API 670 Accelerometer
• Sensor: Temperature-stabilized piezo-electric
• Amplifier: Built-in, provides high-level, low-impedance output
• Housing: 316 stainless steel, electrically isolated sensing circuit

Specifications

Dynamics

• Accuracy: ±2% (repeatability)
• Sensitivity: 100 mV/g (±5%)
• Frequency Response:
  • ±5%: 1 to 4000 Hz
  • ±10%: 0.67 to 6500 Hz
  • ±3dB: 0.33 to 12,000 Hz
• Resonant Frequency: 18 kHz
• Cross Axis Sensitivity: ≤5%
• Measurement Range: ≤50 g
• Broadband Resolution: 1000 µg

Mechanical

• Case Material: 316 Stainless Steel
• Connector: 2-pin MIL-C-5015 Hermetic
• Seal: Welded
• Mounting Thread: 1/4-28 Female
• Sensing Element: Quartz
• Weight: 94 gm (3.3 oz)

Electrical

• Excitation Current: 2 to 20 mA
• Excitation Voltage: 18 to 28 VDC
• Output Bias: 8 to 12 VDC
• Settling Time: ≤10 sec
• Protection: RFI & ESD

Environmental

• Shock Limit: 5,000 g peak
• Temperature Range: -65°F to +250°F (-54°C to +121°C)
• Enclosure Rating: IP68
• Certifications: CSA, ATEX, IECEx

Ordering Guide

Model Number Format: SA6200 - A B C

• A (Hazardous Area Certification):

  • 0: Non-Agency Approved
  • 5: CSA, ATEX, IECEx (various classes and divisions)

• B (Mounting Stud):

  • 5: 1/4-28 UNF and M6 x 1.0
  • 3: None

• C (Connector Type):

  • 1: 2-pin Hermetic Plug

EXP:  SA6200-551