|
|
|
Thermon
The
Heat Traceing Specialists
Thermon holds a unique position as the only
international heat tracing company completely dedicated to its industry. Since
1954, Thermon has concentrated its efforts exclusively on heat tracing, the
external application of heat to pipes, tanks and
instrumentation.
|
|
|
Custom CEMS and
Analyzer Bundles
 TubeTrace® Heated Instrument Tubing and
Non-Heated Tubing Bundles - Your CEMS and Analyzer sample lines will be
cost-effective and reliable with Thermon. Thermon's flexible manufacturing
process can include auxiliary conductors, non-heated tubes, factory installed
temperature sensors, a variety of heat tracing options, special markings and
identification as required.
- 316 and 304 stainless, welded or seamless, Monel,
titanium, Alloy 825, and Alloy 20 are readily available.
- Optional Electropolished (EP) finishes and chemical
passivation (CP), (including SilcoSteel, Siltek/Sulfinert and SilcoNert
coatings) 1 are also available.
- Double containment tubing and/or multiple tube
materials can be provided in a common bundle.
- Fluoropolymer tubing (including PFA, TFE, and FEP),
nylon, polyethylene, composite filament-wound tubing and most any other tubing
material is also available.
- Embedded Temperature Sensors To accurately sense
temperatures in one or more locations, factory installed temperature sensors
(RTD, Thermocouple, or Thermistor) with insulated leads rated 500°F
(260°C) are available.
TubeTrace HTX
Tubing Bundles
 TubeTrace HTX is a
pre-engineered electric traced tube bundle for steam sample lines and impulse
lines to pressure transmitters. TubeTrace HTX will provide water freeze
protection in ambient conditions down to -50°F (-45°C) with 25 mph (40
kph) wind conditions. HTX is suitable for superheat steam service temperatures
up to 1100°F (593°C).
In the past, tubing subject to high
temperature exposure was heat traced with series resistance mineral insulated
(MI) heat trace. MI heaters are custom made to fit each application, so long
lead times are often required. TubeTrace HTX solves this with Thermon parallel
resistance HPT heat trace isolated from direct contact with high temperature
tubing.
TubeTrace HTX bundles are designed to withstand continuous
1100°F (593°C) superheat steam temperature even when power is applied
to the heat trace during ambient conditions of 40°F (5°C).
External Link
to THERMON Website
Other TechQuip Product
Lines
|
|
|
|
