|
|
|
Magnetrol
Level and Flow Controls.
To look at one, the average person wouldn't have a clue as to its function, let
alone its importance. Truth is, level and flow controls are crucial to the
world's manufacturing environments.
Magnetrol has come a long way since
they produced their first electro-mechanical level switch in 1932. Their
commitment to customers, however, hasn't changed.
|
|
|
Pulse Burst Radar
Level Transmitter
 |
The Pulsar Pulse Burst Radar level transmitter is
the latest generation of loop-powered, 24 VDC, liquid level transmitters. It
has lower power consumption, faster response time and is easier to use than
most loop-powered radar transmitters.
• Performance not process
dependent (changing specific gravity and dielectric have no effect)
• 5.8/6.3 GHz operating frequency
offers superior performance in the tougher applications of turbulence, foam,
and heavy vapors
• Antenna designs to +400 °F (+204 °C)
• Range up to
65 feet (20 meters)
• Quick connect/disconnect probe coupling allows vessel to
remain sealed (patent pending)
• Safety Integrity Level (SIL) value of 1 |
Kotron® Model
801 RF Capacitance Transmitter
 Kotron Model 801 is a multi-function
transmitter that offers the user unparalleled power. The 801 can interface with
two separate vessels, while software mathematics allow for the total or
difference of the two measurements.
• Level signal from one vessel
can be mathematically added to, or subtracted from, another vessel
• Level/Volume
and Level/Flow characterization
• Integral keypad on front
panel
•
Provides one 4-20 mA isolated analog output
• 16-character alphanumeric display
• Dual
input of two probes from separate vessels |
Ultrasonic
Transmitters
 Echotel® Model 961/962
Ultrasonic Level Switches
The Echotel 961/962 series utilizes pulse wave
technology to detect high or low level alarm(s)in a broad range of viscous to
light liquids. The Echotel 961 has a tip sensitive setpoint and is ideally used
as high or low level alarm. The Echotel 962 offers 2 setpoints on the same
sensor. The unit is used for level alarm or pump control. The Echotel 961/962
is equipped with advanced diagnostics that continuously check the sensor and
electronics.The diagnostics also alarm for electrical noise interference from
external sources.
Echotel® Model 338 Two-Wire
Non-Contact Ultrasonic Transmitter
Echotel Model 338 is a two-wire,
loop-powered non-contact transmitter for liquid level, volume, and open channel
flow measurement. Featuring advanced digital signal processing and a powerful
transducer, this versatile transmitter provides exceptional measurement
performance in a wide variety of applications.
External Link to Magnetrol
Website
Other TechQuip Product
Lines
|
|
|
|
